Different methods of determining centric relation - comparison with a digital mandibular motion analyser.

BACKGROUND: Finding and registering the maxillary-mandibular jaw relation is crucial in dental practice. Several comparative studies have been conducted to investigate the reproducibility and accuracy of techniques for determining the centric relation (CR) position of the mandible. The aim of our study was to determine which of seven different CR determination methods had the smallest deviation from the theoretical zero with the help of a digital mandibular motion analyser. The chosen theoretical zero position, the maximal intercuspal position (MIP), is the most reproducible and widely used position. METHODS: Thirty-four volunteers (24 females and 10 males) with a mean (SD) age of 29.1 (± 7.3) years with a negative history of temporomandibular disorder (TMD) participated in the study. A digital mandibular motion analyser was used to register the condylar position after the use of each technique for the determination of CR. The calibration was performed to the maximal intercuspal position (MIP) for each volunteer. The investigated techniques were (A) the gothic arch tracer, (B) the adduction field method, (C) Dawson's bimanual manipulation, (D) the patient placing the tongue tip on the palatal rugae, (E) the patient placing the tongue tip to the border of the hard and soft palate, (F) the patient actively pulling the chin backwards, and (G) the examiner pushing the patient's chin back. RESULTS: The position of the mandibular condyle was illustrated in a three-dimensional coordinate system, where the origin represented the MIP. Among the seven methods examined, five showed significant deviations compared to the MIP. Among these, two methods resulted in posterior deviation of the condyles. Methods C and E coincided with the MIP in all directions. CONCLUSIONS: Within the limitations of our study, we found that the smallest deviations from our theoretical zero (MIP) among the investigated centric relation determining methods were obtained with the bimanual mandibular manipulation technique derived from Dawson and the placement of the tongue tip on the border of the hard and soft palate (linguomandibular homotrophy theory).

Myocentric relation in an additive esthetic rehabilitation within a fully digital workflow.

In recent years, tooth wear has been a growing concern in dentistry as it has become increasingly prevalent among the population. At the same time, the development of adhesive techniques has enabled minimally invasive treatment protocols, with the goal of preserving and protecting teeth for as long as possible. This clinical report presents the case of a full-mouth rehabilitation patient with tooth wear who was treated using minimally invasive techniques. Esthetic and functional outcomes were designed and monitored using digital tools such as digital impressions, 3D facial scans, a digital tooth library, transcutaneous electrical nerve stimulation (TENS), MRI, and kinesiographic (KS) analysis throughout the treatment. To increase the vertical dimension of occlusion, instead of using traditional centric relation (CR) methods, a myocentric relation (MCR) technique was employed. This approach allowed the clinician to maintain the occlusal Class I situation, avoiding more invasive orthodontic treatment or maxillofacial surgery and resulting in reduced morbidity, treatment time, and cost for the patient. At the 1-year follow-up, good patient adaptation was shown, suggesting that the MCR concept is a viable alternative to conventional CR methods in appropriate cases.

Does increasing vertical dimension of occlusion in centric relation affect muscular activity? An electromyographic study.

OBJECTIVE: In many esthetic treatments, clinicians may consider the option to modify the maxillo mandibular position. A raise of the vertical dimension of occlusion (VDO) may help restore esthetics, increase the space for dental materials, and reduce the invasiveness of dental procedures. Traditionally, VDO increases are done by using the centric relation (CR) position. Despite a long history of use, the neuromuscular effects of different maxillo mandibular relations are not fully studied. The aim of this study was to investigate the effect of alterations of maxillo-mandibular relation from maximal intercuspal position (MIP) to a raised VDO CR position on jaw-elevator muscle activity. MATERIALS AND METHODS: Fifteen healthy individuals were asked to carry out maximal voluntary clenching (MVC) in MIP and in CR on individual splints. Electromyographic (EMG) activity of the masseter and anterior temporalis muscles was assessed in µV as the root mean square of the amplitude. Specific indexes and ratios were also computed. Data analyzed in MIP and CR were compared by paired student's t-tests. RESULTS: MVC levels were not negatively affected by a VDO increase in CR position. On the contrary masseter muscles showed a statistically significant increase (p < 0.005). No significant effect on the anterior temporalis was observed. CONCLUSION: These results suggest that no immediate negative effect on maximum voluntary clenching was induced by a VDO increase in CR position. A slight increase observed in EMG clenching levels could be explained by the increase in VDO when clenching on the splint. CLINICAL IMPLICATIONS: The results of this study support the use of CR position as a pragmatic reference position due to the absence of relevant or negative changes in neuromuscular function.

Diagnosis, treatment planning, and comprehensive restoration of a patient with Costello syndrome: rationale and application of indirect composite resin onlays.

Patients with a complex problem set involving multiple levels of altered structure challenge the clinician to develop an individualized, appropriate treatment plan. Dentofacial deficiency, occlusal problems, and loss of tooth structure require intervention to establish stability and regain function, speech, esthetics, and masticatory muscle comfort. The comprehensive examination must quantify each problem to specify the diagnosis for realistic treatment planning. The clinical case of a patient with Costello syndrome is presented to illustrate essential concepts in diagnosis and treatment of complex cases, including (1) Global Diagnosis of anterior esthetic relationships, (2) occlusal analysis with diagnostic casts verified in centric relation, (3) comprehensive restoration previewed with a diagnostic wax-up and removable acrylic resin overlay, (4) adhesive monobody composite resin onlays that preserve tooth structure, and (5) programmed occlusion, quantified with digital occlusal analysis, to ensure stability and comfort. Costello syndrome is a neurodevelopmental syndrome causing multisystem effects, including a distinctive craniofacial phenotype, cardiovascular disease, intellectual disability, growth hormone deficiency, and dental abnormalities such as delayed dental development, bruxism, and demineralized enamel lesions. In the present case, quantification of the patient's problem set allowed precise treatment planning that resulted in predictable restoration.

Centric relation-A biological perspective of a technical concept.

BACKGROUND: Few terms and concepts have been so extensively debated in dentistry as the words 'centric relation' (CR). Debates involve its biological, diagnostic and therapeutic usefulness. METHODS: A review of the literature on the current concepts on CR as a diagnostic or therapeutic aid in dentistry was provided. Clinical trials assessing the superiority of one CR recording method over the others to identify patients with temporomandibular disorders (diagnostic use) or to manage patients with prosthodontic or orthodontic needs (therapeutic use) were tentatively included. RESULTS: Due to the absence of literature addressing either of the above targets, a comprehensive overview was provided. The diagnostic use of CR as a reference position to identify the correct position of the temporomandibular joint condyle within the glenoid fossa is not supported and lacks anatomical support. From a therapeutic standpoint, the use of CR can be pragmatically useful in prosthodontics as a maxillo-mandibular reference position when occlusal re-organization is warranted and/or when the position of maximum intercuspation is no longer available. CONCLUSIONS: The derived occlusal goals from a diagnostic misuse of CR are generally the result of circular reasoning, that is a technique is based on the recording of a certain condylar position that is believed to be 'ideal' and the treatment is considered successful when such position is shown by the specific instrument that was manufactured for that purpose. The term 'Centric Relation' might be replaced with the term 'Maxillo-Mandibular Utility Position'.

Magnetic resonance imaging assessment of articular disc position in temporomandibular disorder subjects with various bite registrations.

Objective: This study aimed to evaluate the validity and reliability of three bite registrations on articular disc position in temporomandibular disorder patients using magnetic resonance imaging (MRI). Materials and Methods: Fifteen clinically symptomatic and orthodontically untreated temporomandibular disorder patients within the age range of 17-40 years (mean age: 28.5 years) were examined. Each patient was subjected to three bite registrations, namely maximum intercuspation, initial contact bite and Roth power centric bite, and evaluated with MRI. Results: On the right side, the mean vertical and horizontal measurement values of the point in the most posterior aspect of the posterior band of the articular disc in relation to horizontal reference line (HRL) and vertical reference line (VRL) in the sagittal view in the Roth power centric bite were lesser (2.720 ± 1.239 mm and 2.380 ± 1.185 mm, respectively), in comparison with the other two bites, and on the left side too, it was lesser in the Roth power centric bite (2.293 ± 0.979 mm and 2.360 ± 1.078 mm, respectively), when compared to the other two bites. Statistical analysis also showed the significance of Roth power centric bite over the other two bites. Conclusions: Favourable articular disc positional changes were observed in the Roth power centric bite followed by the initial contact bite and that maximum disc recapture was observed in most patients with the Roth power centric bite rather than in initial contact bite and maximum intercuspation positions. The Roth power centric bite could be assumed to be the ideal method for articulation and fabrication of gnathological splints for treating patients with temporomandibular disorders.

Área de Céntrica, Revisión del Concepto. Una Revisión Narrativa / Central Area, Review of the Concept. A Narrative Review

La búsqueda de una oclusión ideal es uno de los principales objetivos de los tratamientos rehabilitadores. Para que esta se cumpla, es necesario que se presenten ciertas características, en base a esto, se ha constituido el concepto de "tríada en céntrica", que se define como la coincidencia entre la relación céntrica fisiológica (RCF), posición muscular de contacto (PMC) y posición de máxima intercuspidación (PMI), existiendo de esta forma un equilibrio morfofuncional óptimo de los diferentes componentes del sistema estomatognático. Así nace la necesidad de analizar los conceptos que involucren la relación existente entre las distintas posiciones mandibulares, dentro de estos conceptos encontramos el "área de céntrica", que debido a sus características, se le atribuye relevancia y utilidad clínica cuando se entiende su aplicación. El objetivo de este estudio fue analizar el concepto de área céntrica, actualizar los conceptos oclusales asociados y proponer nuevas metodologías para su evaluación. En ocasiones existen interferencias oclusales que impiden que la mandíbula continúe su recorrido habitual para llegar a determinada posición, estas interferencias se conocen como contactos prematuros, cuando estos existen, naturalmente la mandíbula se desvía hacia una posición de acomodo. El deslizamiento en céntrica se define como el movimiento de la mandíbula mientras se encuentra posición retruida de contacto no forzada, es decir, la posición de contacto que se produce cuando la mandíbula se cierra en RCF, hasta llegar a PMI, este deslizamiento se produce debido a la presencia de contactos prematuros, cuando no existen contactos prematuros, esta posición coincidirá con PMI. El área de céntrica se define como el deslizamiento de la mandíbula entre la posición retruída ligamentosa (PRL) y PMI. Idealmente, la PMI se da cuando los cóndilos están en RCF y coincide con la PMC, debe existir siempre un área de céntrica, pues fisiológicamente ninguna articulación adoptara naturalmente una posición extrema como la PRL.

The search for an ideal occlusion is one of the main objectives of rehabilitation treatments. For this to be fulfilled, some characteristics need to be present, based on this, the concept of "centric triad" has been constituted, which is defined as the coincidence between the physiological centric relation (CR), muscular contact position (MCP) and maximum intercuspal position (MIP), thus existing an optimal morphofunctional balance of the different components of the stomatognathic system. In this way, the need arises to analyze the concepts that involve the relationship between the different mandibular positions, within these concepts we find the "centric area", which due to its characteristics, it is attributed relevance and clinical utility when its application is understood. The objective of this study was to analyze the concept of centric area, update the associated occlusal concepts and propose new methodologies for its evaluation. Sometimes there are occlusal interferences that prevent the jaw from continuing its usual path to reach a certain position, these interferences are known as premature contacts, when they exist, the jaw naturally deviates towards a position of accommodation. Centric slide is defined as the movement of the mandible when it is in a retruded contact position unforced, that is, the contact position that occurs when the mandible closes in CR, until reaching MIP, this sliding occurs due to in the presence of premature contacts, when there are no premature contacts, this position will coincide with PMI. The centric area is defined as the slippage of the mandible between the retruded ligamentous position (RLP) and MIP. Ideally, the PMI occurs when the condyles are in CR and coincides with the MCP, there should always be a centric area, since physiologically no joint will naturally adopt an extreme position like PRL.

Accuracy of the maxillomandibular relationship at centric relation position recorded by using 3 different intraoral scanners with or without an optical jaw tracking system: An in vivo pilot study.

PURPOSE: To measure the accuracy (trueness and precision) of the maxillomandibular relationship at centric relation position recorded by using 3 different intraoral scanners with or without an optical jaw tracking system. MATERIAL AND METHODS: A completely dentate volunteer was selected. Seven groups were generated: conventional procedure (control group), 3 IOSs: Trios4 (Trios4 group), Itero Element 5D Plus (Itero group), i700 (i700 group), and 3 groups with a jaw tracking system for each corresponding IOS system (Modjaw-Trios4, Modjaw-iTero, and Modjaw-i700 groups) (n = 10). In the control group, casts were mounted on an articulator (Panadent) using a face bow and a CR record captured with the Kois deprogrammer (KD). The casts were digitized by using a scanner (T710) (control files). In the Trios4 group, intraoral scans were obtained by using the corresponding IOS and duplicated 10 times. The KD was used to obtain a bilateral occlusal record at CR position. These same procedures were followed for the Itero and i700 groups. In the Modjaw-Trios 4 group, the intraoral scans acquired by using the corresponding IOS at MIP were imported into the jaw tracking program. The KD was used to record the CR relationship. For acquiring the specimens in the Modjaw-Itero and Modjaw-i700 groups, the same procedures were followed as in the Modjaw-Trios4 group, with the scans obtained with the Itero and i700 scanners respectively. The articulated virtual casts of each group were exported. Thirty-six inter-landmark linear measurements were used to calculate the discrepancies between the control and experimental scans. The data were analyzed by using 2-way ANOVA followed the pairwise comparison Tukey tests (α=0.05). RESULTS: Significant trueness and precision discrepancies were found among the groups tested (P<.001). The Modjaw-i700, Modjaw-iTero, Modjaw-Trios4, and i700 groups obtained the best trueness and precision among the groups tested, and the iTero and Trios4 groups obtained the worst trueness. The iTero group obtained the worst precision among the groups tested (P>.05). CONCLUSIONS: The maxillomandibular relationship recorded was influenced by the technique selected. Except for the i700 IOS system, the optical jaw tracking system tested improved the trueness value of the maxillomandibular relationship recorded at CR position when compared with the corresponding IOS.

Tongue training technique for guiding the mandible in establishing horizontal jaw relation in edentulous patients.

BACKGROUND: Edentulous patients have poor neuromuscular proprioception to guide the mandible to the desirable horizontal relation. Horizontal jaw relation is a complex relationship in which variation may occur in vertical, anteroposterior and mediolateral directions. OBJECTIVE: The aim of this study was to train the tongue and bring the mandible to centric relation in geriatric edentulous cases. MATERIALS AND METHODS: Protrude the tongue to the maximum length and retract back to centric relation, move the tongue on the left side beyond the angle of the mouth and bringing back to centric relation, move the tongue on the right and left side beyond the angle of the mouth and bringing back to centric relation, then the tongue should move upwards and touches the marginal tubercle of upper lip and bringing back to centric relation and move the tongue upward and posteriorly to touch the posterior part of the hard palate of the maxilla and swallowing. RESULTS: Edentulous patient can successfully move the mandible in centric relation after training the tongue. CONCLUSION: The present technique is useful for establishment of horizontal jaw relation in edentulous cases using tongue training exercise in Prosthodontic dentistry.

Oclusión basada en evidencia: rompiendo paradigmas / Occlusion based on evidence: breaking paradigms

La odontología basada en evidencias es una metodología que busca que las decisiones clínicas diarias que toman los profesionales en estomatología se encuentren fundamentadas en la evidencia científica, en ella se integran las experiencias clínicas, las necesidades, las preferencias del paciente y la evidencia clínicamente relevante más actual analizada por pares. Estos pilares son parte del proceso en la toma de decisiones para la atención al paciente. La odontología basada en evidencias surge de las exitosas experiencias obtenidas con el desarrollo e implementación de la medicina fundamentada en pruebas, al aplicar el método científico en la evaluación, planificación y toma de decisiones de las prestaciones sanitarias, sobre todo a través de los estudios controlados. En general, toda la práctica odontológica ha tenido grandes avances basados en evidencias, con hechos verídicos comprobados, pero los conceptos fundamentales de oclusión no han tenido una mejora cimentada en el conocimiento científico, prueba de ello es que se siguen ocupando teorías y conceptos de las filosofías de oclusión en la rehabilitación de muchos pacientes, seguimos creyendo en mitos y sofismas que no han podido ser demostrados. En esta revisión, demostramos los grandes avances en los conceptos de oclusión e invitamos a todos los odontólogos a romper los paradigmas de la oclusión antigua sin evidencias científicas y a utilizar las herramientas del método científico en la práctica clínica odontológica (AU)

Evidence-based dentistry is a strategy that seeks to ensure that the daily clinical decisions made by the dental professional are based on scientific evidence. It integrates the clinical experience of the dentist, the needs and preferences of the patient, and the most current relevant clinical evidence. All three are part of the decision-making process for patient care. Evidence-based dentistry arises from the successful experiences obtained with the development and implementation of evidence-based medicine, applying the scientific method in the evaluation, planning and decision-making of health benefits, especially through controlled studies. In general, all dental practice has had great advances based on evidence, with proven true facts, but the fundamental concepts of occlusion have not had an improvement based on scientific knowledge, proof of this is that theories and concepts continue to be used. of the philosophies of occlusion in patient rehabilitation, we follow myths and sophisms that have not been demonstrated, in this review, we demonstrate the great advances in the concepts of occlusion and we know all dentists to break the paradigms of the old occlusion without scientific evidence (AU)

[A clinical application study of digital manufacturing simple intraoral Gothic arch-tracing device in determining the centric relation of complete dentures].

OBJECTIVE: To verify the consistency between the digital manufacturing simple intraoral Gothic arch-tracing device and the traditional intraoral Gothic arch-tracing device in determining the centric relation of complete dentures restoration. METHODS: Ten outpatients with edentulous jaws were selec-ted, and the centric relation of the patients was determined by digital manufacturing of simple intraoral Gothic arch-tracing device (T1) and traditional intraoral Gothic arch-tracing device (T2); the difference of clinical operation time between the two methods was recorded; the upper and lower edentulous jaw plaster models were scanned with two kinds of centric relation, the Standard Triangle Language (STL) files imported into Geomagic studio software to apply the best fitting of multiple points of the both upper jaw models, the fitted STL files imported into the 3 shape viewer software, and the maximum position deviations of the vertical, labial (buccal) and lingual directions of the mandibular midline area and molar areas in T1 and T2 groups measured. During the clinical complete dentures try-in, we observed whether there was midline deviation in the mouth of T1 group and T2 group, and whether the occlusion of posterior teeth was stable or not. RESULTS: The mean time spent on determining the centric relation of T1 and T2 groups was (41.90±2.64) min, (57.50±2.37) min respectively. Paired t test was conducted in the two groups, P < 0.01 with significant statistical difference; The mean maximum position deviation between T1 group and T2 group of the midline mandibular region in labial lingual direction was (0.32±0.14) mm, that was (0.40±0.23) mm in vertical direction; the mean maximum position deviation of molar area in buccal lingual direction was (0.35±0.23) mm and that was (0.33±0.20) mm in vertical direction. In the vertical and horizontal directions, the maximum position deviation of mandibles between group T1 and group T2 was controlled within 0.5 mm. In the process of clinical complete dentures try-in, there was no deviation from the center line of dentures. There was not warping, swinging and other poor stability phenomena in T1 and T2 groups. CONCLUSION: The digital manufacturing of simple intraoral Gothic arch-tracing device can be used to determine the centric relation of complete dentures, which can not only save time of clinical operation, but also ensure the accuracy of the centric relation.

Selecting a Virtual Articulator: An Analysis of the Factors Available with Mechanical Articulators and their Potential Need for Inclusion with Virtual Articulators.

The ever-expanding world of digital technology has produced many changes, including the availability of virtual articulators. The use of such digital technology requires an understanding of the features that have been available with different mechanical articulators. These features include such items as facebow, intercondylar distance, incisal guide table, condylar inclination, reference plane, lateral condylar inclination, immediate mandibular translation, and ability to verify a centric relation record. This paper reviews the adjustable features that have been available with different types of mechanical articulators so that clinicians can determine if these features should be included in the virtual articulators they choose to use. Regardless of whether one is utilizing a mechanical or virtual articulator, the rationale for which type of articulator to select is the same and is predicated on the needs of the patient, the occlusal philosophy of the clinician, and the required accuracy.

Centric relation: A needed reference position.

PURPOSE: Centric relation (CR) is a universally recognized term and an acceptable reference position with a long history of success. The problem is that there is little consensus as to its definition or the method of recording it, and this has created an uprising to abolish it. METHODS: A review of pertinent literature related to its definition, method of recording, anatomic considerations, and long-standing principles was conducted. RESULTS: Centric relation is an established term but there are valid concerns over its definition and method of recording. There is consensus on using it as a restorative position in a patient in need of full-arch reconstruction, and there is no substantive clinical research to contradict this. If a clinician decides to use a different position, it should have a different name. CONCLUSIONS: Centric relation is a reproducible reference position that can be utilized for diagnostic and restorative dental procedures with substantial scientific evidence to support that premise. There are numerous well-documented techniques, all of which are intermaxillary, that can replicate the position. There is little scientific evidence to support a premise as to where the exact position of the condyle should be in relation to the fossa.

Clinical reproducibility of different centric relation recording techniques in edentulous individuals: An observational cross-sectional study.

PURPOSE: To assess the reproducibility of four different centric relation (CR) recording techniques, and time spent performing each technique in edentulous individuals. MATERIALS AND METHODS: Four techniques were assessed: extraoral gothic arch (EOGA) tracing, intraoral gothic arch (IOGA) tracing, deglutition (D), and frontal manipulation with tongue elevation (FMTE). Twelve subjects participated in the study; four technique records were performed on each volunteer by the same operator. Each record was repeated three times, in the same period of the day, with a 30 min interval between each technique. The reproducibility of each technique was assessed by the tri-dimensional displacement of the position of the condylar housing (mandible condyle) to the wall of the condylar guide (glenoid cavity) in the semi-adjustable articulator (anteroposterior, mediolateral, and superior-inferior). The time spent on each technique was timed in seconds (from the beginning of each technique until the wax occlusion fixation). The analysis of variance (ANOVA) and the Tukey test were performed for anteroposterior displacement (two-way) and for time spent on CT recording techniques (one-way) (α < 0.05). Regarding mediolateral and superior-inferior displacements, the nonparametric Kruskal-Wallis was performed for the comparison between recording methods, whereas the Mann-Whitney test was performed for the comparison between sides (α < 0.05). RESULTS: The factor recording technique interfered with the anteroposterior displacement (ANOVA: α < 0.001; F = 11.396). The technique D (right side: 3.78 ± 0.69 mm; left side: 3.45 ± 0.74 mm) showed a statistically significant difference compared to the other techniques (EOGA: right side: 3.00 ± 0.00 mm; left side: 3.00 ± 0.00 mm; FMTE: right side: 2.81 ± 0.52 mm; left side: 2.82 ± 0.79 mm; IOGA: right side: 2.90 ± 0.65 mm; left side: 3.12 ± 0.44 mm). The time spent on the recording technique influenced the results (ANOVA: α < 0.001; F = 21.118). The IOGA (340.40 ± 163.41 s) and EOGA (285.93 ± 133.84 s) required more time compared to the D (86.00 ± 34.33 s) and FMTE (101.33 ± 36.72 s) techniques. CONCLUSION: Graphic recordings showed better reproducibility and accuracy of the position of the centric relation.

Is There "A Best" Centric Relation Record? Centric Relation Records, Condyle Positions, and Their Practical Significance.

PURPOSE: To investigate if and how the positions of condyles in centric relation (CR) varied from each other using different CR records. MATERIALS AND METHODS: Condylar positions in CR were repeatedly recorded by four licensed clinicians in 81 stomatognathically healthy, fully dentate subjects with six different types of CR records. The maxillary casts were mounted in articulators after individual facebow transfer, and the mandibular casts were mounted with a central bearing point (CBP) registration on the tip of the Gothic arch. Mean values from three registrations of the centric condylar positions with each of the six methods were calculated, and comparative calculations were made. RESULTS: The median spatial distances of the condylar positions between the CBP and all other CR records was 0.73 ± 0.24 mm (0 to 3.19 mm). The median spatial values between the condylar positions of the different CR records ranged from 0.48 to 0.79 mm. Statistically, the positions of almost all types of registration were slightly different from each other. CONCLUSION: Different CR records reproduce slightly different positions of the mandible, which is especially true for CBP registration, whereas reproducibilities and SDs between registrations are similar. Unrefined wax-wafer registrations using bimanual manipulation have proven particularly successful with regard to precision and time requirements, as has CBP registration with regard to condylar position.

A clinical application study of digital manufacturing simple intraoral Gothic arch-tracing device in determining the centric relation of complete dentures / 北京大学学报(医学版)

OBJECTIVE@#To verify the consistency between the digital manufacturing simple intraoral Gothic arch-tracing device and the traditional intraoral Gothic arch-tracing device in determining the centric relation of complete dentures restoration.@*METHODS@#Ten outpatients with edentulous jaws were selec-ted, and the centric relation of the patients was determined by digital manufacturing of simple intraoral Gothic arch-tracing device (T1) and traditional intraoral Gothic arch-tracing device (T2); the difference of clinical operation time between the two methods was recorded; the upper and lower edentulous jaw plaster models were scanned with two kinds of centric relation, the Standard Triangle Language (STL) files imported into Geomagic studio software to apply the best fitting of multiple points of the both upper jaw models, the fitted STL files imported into the 3 shape viewer software, and the maximum position deviations of the vertical, labial (buccal) and lingual directions of the mandibular midline area and molar areas in T1 and T2 groups measured. During the clinical complete dentures try-in, we observed whether there was midline deviation in the mouth of T1 group and T2 group, and whether the occlusion of posterior teeth was stable or not.@*RESULTS@#The mean time spent on determining the centric relation of T1 and T2 groups was (41.90±2.64) min, (57.50±2.37) min respectively. Paired t test was conducted in the two groups, P < 0.01 with significant statistical difference; The mean maximum position deviation between T1 group and T2 group of the midline mandibular region in labial lingual direction was (0.32±0.14) mm, that was (0.40±0.23) mm in vertical direction; the mean maximum position deviation of molar area in buccal lingual direction was (0.35±0.23) mm and that was (0.33±0.20) mm in vertical direction. In the vertical and horizontal directions, the maximum position deviation of mandibles between group T1 and group T2 was controlled within 0.5 mm. In the process of clinical complete dentures try-in, there was no deviation from the center line of dentures. There was not warping, swinging and other poor stability phenomena in T1 and T2 groups.@*CONCLUSION@#The digital manufacturing of simple intraoral Gothic arch-tracing device can be used to determine the centric relation of complete dentures, which can not only save time of clinical operation, but also ensure the accuracy of the centric relation.

Static mandibular condyle positions studied by MRI and condylar position indicator.

We compared mandibular condyle positions as determined by magnetic resonance imaging (MRI) and a mechanical device, the condylar position indicator (CPI). Both methods assessed 3 mandibular positions in 10 asymptomatic males and 10 asymptomatic females, aged 23 to 37 years, free from temporomandibular disorders: maximum intercuspation, bimanually manipulated centric relation, and the unguided neuromuscular position. Bite registrations were obtained for bimanual operator guidance and neuromuscular position. 3 T MRI scans of both temporomandibular joints produced 3D data of the most superior condylar points in all 3 mandibular positions. Using mounted plaster casts and the same bite registrations, an electronic CPI displayed 3D data of its condylar spheres in these positions. The results showed interclass correlation coefficients ranging from 0.03 to 0.66 (95% confidence intervals from 0 to 0.8) and significantly different condyle positions between both methods (p = 0.0012, p < 0.001). The implications of the study emphasize that condyle position is unpredictable and variable. Its exact knowledge requires radiological imaging and should not rely on CPI assessments.

Centric relation: A matter of form and substance.

The recent review article by Zonnenberg, Türp and Greene 'Centric relation critically revisited - What are the clinical implications'? opens an important debate by addressing topics of central relevance in Dentistry, namely the relationship between occlusion and the condyle-to-glenoid-fossa position, and the need for diagnostic assessment and therapeutic alteration of the condylar position in orthodontic patients. Zonnenberg, Türp and Greene concluded that the mandibular condyle is correctly situated in most orthodontic patients. Thus, in their view, orthodontists can disregard this aspect during treatment, and rely on the plastic properties of the masticatory supporting structures, while aiming at finishing the cases in a good occlusal relationship. We think that this approach fails to consider that biological variation of the stomatognathic structures can also be pathological and that, as dental occlusion determines condylar relative position within the glenoid fossa, changes in the occlusion are likely to alter the original condylar-to-glenoid-fossa relation. Hence, we claim that whenever the occlusal relationship must be changed, the clinician should carefully monitor the condyle position and the mandibular function to prevent possible iatrogenic effects. To advance the discourse on the topic, we invite Zonnenberg, Türp and Greene to clarify their definition of 'average patient' and their interpretation of 'full-mouth orthodontic and orthognathic treatment', their understanding of 'biologically acceptable condylar relationship', their justification of maximum intercuspation as reference position, the extent to which they think it is safe to rely on the TMJ resilience, and finally their alternative to centric relation in the treatment of patients needing condylar repositioning.

The Role of Maxillofacial Structure on Condylar Displacement in Maximum Intercuspation and Centric Relation.

PURPOSE: This study is aimed at evaluating the impact of the craniofacial structure and occlusal conditions on the position of the articular heads of the mandibular condyles in the maximum intercuspal position (MIP) and comparing the centric relation (CR) and MIP of the mandibular condyles prior to orthodontic treatment. METHODS: The studied group consisted of 33 women and 15 men (median age of 17.75 years). Contact points of opposing teeth in the MIP were assessed by hand-held casts. Condylar displacement (CD) in three spatial planes on both sides was measured on models mounted in an articulator using a mandibular position indicator (MPI). Patients were divided into groups according to craniofacial structures (vertical and horizontal growth directions). The Mann-Whitney, Kruskal-Wallis, post hoc Dwass-Steel-Critchlow-Fligner, and Pearson's χ 2 independence tests as well as Spearman's nonparametric correlations were used in the statistical analyses. RESULTS: Within the limitations of this study, no statistically significant correlation of CD with certain cephalometric measurements from a lateral cephalometric radiograph (ANB, SN-ML, and SGo/NMe) was observed. Correlation, however, was found between condylar displacement in the transverse axis and the mandibular plane angle SN-ML (p = 0.033) and also between condylar displacement in the anteroposterior axis and a midline shift of the mandible (p = 0.041). The results revealed a relationship between Angle's classification of molar position on the right side and anteroposterior CD values (p = 0.006). CONCLUSIONS: Cephalometric measurements cannot be used to predict CD at the level of the condyles. Analysis of occlusal conditions of models mounted in an articulator is desirable for patients with Angle's class I and lower jaw asymmetry.